COPLATE® Ref. CBZwiR-24F2
COPLATE®️ Ref. CBZwiR-24F2 for trainer: Wahoo Kickr CORE with Zwift Ride
Short execution. The top and bottom plate are made of dark brown or black coated birch plywood 12mm. Including mounting kit with 4 bolts and pipe clamps. (no Velcro) for a solid securing of the Wahoo Kickr Core on the Coplate® and inclusive a standard XPS hard foam front tube riser.
Dimensions: HxLxB =5x20x10cm (ref. 14036-2010)
Due to the small tilting angle of the front tube, it is not necessary to use a rocker table for the front tube.
Price € 211,70 excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
COPLATE®️ Ref. CBZwi1-
20F2
COPLATE®️ Ref. CBZwi1-20F2 for trainer: Zwift Hub One -JetBlack VOLT ™
Short execution.The top and bottom plate are made of coated birch plywood 12mm.
Including mounting kit with 2 bolts (no velcro) for securing the Zwift Hub One on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Due to the small tilting angle of the front wheel, it is not absolutely necessary to use a front wheel rocker table.
Price € 208,00: excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
COPLATE®️ Ref. CBZwi123-23RT2
COPLATE®️ Ref. CBZwi123-23RT2 for trainer: Zwift Hub One-
JetBlack VOLT ™
Long execution, the top and bottom plate are made of coated birch plywood 12mm.
Including mounting kit with 2 bolts (no velcro) for securing the Zwift Hub One on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036). The advantage of this long execution is also that no separate front wheel riser is required and the bicycle is exactly horizontal when using a Coplate® with RT2.
Price € 264,90 : Now with temporary discount € 20 = € 244,90
excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
|
Every COPLATE® is supplied with:
- Standard EPS FRONTWHEEL RISER *, (ref. 14036) Height: =5cm. Note: When ordering the rocking table kit Ref. CB-RT2, the above-mentioned front wheel riser is not supplied with a COPLATE® - PRESSURE GAUGE, Ref. 14029 - MINI AIR PUMP, Ref. 14028 - MANUAL, in Dutch and English * Important information: While using a rocker plate, we recommend (see below): the front wheel riser ref. CB-VT or a rocking table kit Ref. CB-RT2, a trainer mat and the step ref. CB-0S |
 (delivery without shown Tacx frontwheel support)
*Standard FRONTWHEEL RISER, Ref. 14036-2010, -2020, -2525 and -2036 Material: XPS hard foam. Height: 5cm Eliminates almost the height difference 8cm of the COPLATE®  Minipump ref. 14028
MINI AIR PUMP, Ref. 14028 for inflating the air suspension.  Pressure gauge ref. 14029
PRESSURE GAUGE, Ref. 14029 with deflating function , Case: S.S. Ø 40 mm, Range: black 0-1 bar / red 0-15 psi. |
COPLATE®️ Accessories
Ref. CB-0S
STEP Ref. CB-0S
When using the rocker plate with height 9 cm, this step is very helpful in getting safe and easy up and off your bike. Made of black coated birch plywood 12mm and four steel legs.
Dimensions: 27x27x12 cm (LxWxH)
Price: € 46,80 excl. freight and excl. Tax (outside EU)
Delivery time: from stock.
When using the rocker plate with height 9 cm, this step is very helpful in getting safe and easy up and off your bike. Made of black coated birch plywood 12mm and four steel legs.
Dimensions: 27x27x12 cm (LxWxH)
Price: € 46,80 excl. freight and excl. Tax (outside EU)
Delivery time: from stock.
Ref. CB-VT
FRONT WHEEL RISER 'DE LUXE’ Ref. CB-VT
When using the rocker plate with height 9 cm this "DE LUXE" riser is recommended instead of the standard supplied EPS foam front wheel riser with a height of 5cm. Made of black coated birch plywood 12mm and 4 steel legs.
Dimensions: 41x29x12 cm (LxWxH).
Price: € 49,20 excl. freight and excl. Tax (outside EU)
Delivery: from stock.
FRONT WHEEL RISER 'DE LUXE’ Ref. CB-VT
When using the rocker plate with height 9 cm this "DE LUXE" riser is recommended instead of the standard supplied EPS foam front wheel riser with a height of 5cm. Made of black coated birch plywood 12mm and 4 steel legs.
Dimensions: 41x29x12 cm (LxWxH).
Price: € 49,20 excl. freight and excl. Tax (outside EU)
Delivery: from stock.