Due to the coronavirus, countries around the world are taking measures that may affect the processing and delivery parcels.
|
|
New:
The CP-RT1: Rocker table for Wahoo Climb. |
COPLATE® F2 with Tacx NEO
COPLATE® F2 with Tacx Flux
COPLATE® F2 with WAHOO Kickr (without Rocker table CP-RT1)
COPLATE® F2 with BKOOL Smart
COPLATE® F2 with Wahoo Kickr Snap
COPLATE® F2 with Elite Direto
Note: Rocker plates are supplied without bicycle trainer/road bike.
|
Dealer for Norway
The COPLATE®️:is the first and the best rocker plate for indoor bicycle trainers.
Designed in 2013, produced and sold by BIKEACCES. Your trainer is mounted securely on the top plate. The top and bottom plate are made of black coated birch plywood 12mm with or very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant, so the best material for this application. The top plate is on two sides suspended by two inflatable air suspensions and connected to the bottom plate by two rocking rubbers. The best solution for rocking because partly due to the rocking rubbers, the top plate will automatically return to the horizontal position in case of no rocker action, even at a pressure of zero bar in the air suspensions. A big advantage compared to rocker plates who are equipped with a central shaft with ball bearings. In this kind of applications ball bearings are not necessary. The whole makes a natural lateral motion possible and increasing the realistic bike motion. The COPLATE®️ saves your frame and bicycle trainers due to the enormous flattening of the dynamic forces on your frame which typically come from bicycle trainers. More and more bicycle brands like BMC (read more), CUBE (read more) and SENSA (read more) are writing on their website that carbon frames are not suitable for bicycle trainers because of the forces on the rear dropouts. See also Post by Eric Schlange zwiftinsider.com/trainer-use-warranty/ The COPLATE® is suitable for most brands of home trainers as Tacx, WAHOO Kickr, Bkool Smart-Pro, Elite Direto, Drivo, Real and Turbo Muin. Due to the air suspension enormous reduction of stresses on the bicycle frame and dropouts and trainer himself!
|
Execution: CPBxx: Black coated birch plywood 12 mm thick with scratch resistant and waterproof top layer.
Execution: CPxx: HPL solid plastic reinforced compact plate of 8 mm thick, moisture-, sweat-, and water resistant.
Solid mounting (Wahoo Kickr)
Stable inflatable air suspension
Max. site to site motion, tilting: 20°
Rocking rubbers (middle) & inflatable air suspension (L+R)
COPLATE® F2 with Kinetic Road Machine
Rocker table - Wahoo Climb - COPLATE® F2
|
COPLATE® Ref. CPTN-18F2 for trainer Tacx NEO. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CPTN-18F2 for trainer: Tacx NEO, NEO 2, NEO 2T.
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Including mounting kit for fixing the Tacx Neo on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 264,04 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Including mounting kit for fixing the Tacx Neo on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 264,04 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CBTN-18F2 for trainer Tacx NEO. Made with black coated birch plywood.
New! COPLATE®️ Ref. CBTN-20F2 for trainer: Tacx NEO, NEO 2 en NEO 2T
The top and bottom plate are made of black coated birch plywood 12mm.
Including mounting kit for fixing the Tacx Neo on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 181,70 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made of black coated birch plywood 12mm.
Including mounting kit for fixing the Tacx Neo on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 181,70 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CPTF-18F2 voor trainer Tacx Flux. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CPTF-18F2 for trainer: Tacx Flux, Flux S en Flux 2.
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Tacx Flux on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Not suitable for Tacx Flux in combination with BlackTrack.
Price € 261,62 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Tacx Flux on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Not suitable for Tacx Flux in combination with BlackTrack.
Price € 261,62 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CBTF-20F2 voor trainer Tacx Flux. Made with black coated birch plywood.
New! COPLATE®️ Ref. CBTF-20F2 for trainer: Tacx Flux, Flux S en Flux 2.
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the Tacx Flux on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Not suitable for Tacx Flux in combination with BlackTrack.
Price € 179,26 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the Tacx Flux on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Not suitable for Tacx Flux in combination with BlackTrack.
Price € 179,26 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CPTG-18F2 for trainer Tacx Genius e.o. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CPTG-18F2 for smart trainer Tacx: Genius, i-Vortex, Ironman, Bushido, Booster, Satori, FLOW and Blue serie (Suitable for use without BlackTrack)
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Tacx Genius etc. on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 254,82 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Tacx Genius etc. on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 254,82 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CBTG-20F2 for trainer Tacx Genius e.o. Made with black coated birch plywood.
New! COPLATE®️ Ref. CBTG-20F2 for smart trainer Tacx: Genius, i-Vortex, Ironman, Bushido, Booster, Satori, FLOW and Blue serie (Suitable for use without BlackTrack)
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the Tacx Genius etc. on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036N).
Price € 172,46 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the Tacx Genius etc. on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036N).
Price € 172,46 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CPWK-18F2 for Trainer Wahoo Kickr. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CPWK-18F2 for trainer: Wahoo Kickr 2014 - 2020**
Inclusive mounting kit for fixing the Wahoo Kickr on the Coplate® and exclusive standard EPS front wheel riser, is not necessary when setting the wheel adjustment of the Wahoo Kickr in position RD24” or use the KICKR SNAP wheel block.
Price € 262,22 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
** While using the Wahoo Kickr together with the Wahoo Climb we strongly recommend the rocking table ref. CP-RT1.
Inclusive mounting kit for fixing the Wahoo Kickr on the Coplate® and exclusive standard EPS front wheel riser, is not necessary when setting the wheel adjustment of the Wahoo Kickr in position RD24” or use the KICKR SNAP wheel block.
Price € 262,22 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
** While using the Wahoo Kickr together with the Wahoo Climb we strongly recommend the rocking table ref. CP-RT1.
COPLATE® Ref. CPWC-19F2 for trainer Wahoo Kickr Core
COPLATE®️ Ref. CPWC-19F2 for trainer: Wahoo Kickr CORE**
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Wahoo Core on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036N).
Price € 257,32 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
** While using the Wahoo Kickr Core together with the Wahoo Climb we strongly recommend the rocking table ref. CP-RT1.
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Wahoo Core on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036N).
Price € 257,32 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
** While using the Wahoo Kickr Core together with the Wahoo Climb we strongly recommend the rocking table ref. CP-RT1.
COPLATE® Ref. CBWC-20F2 for trainer Wahoo Kickr Core. Made with black coated birch plywood.
New! COPLATE®️ Ref. CBWC-20F2 for trainer: Wahoo Kickr CORE**
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the Wahoo Core on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036N).
Price € 174,96 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
** While using the Wahoo Kickr Core together with the Wahoo Climb we strongly recommend the rocking table ref. CP-RT1.
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the Wahoo Core on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036N).
Price € 174,96 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
** While using the Wahoo Kickr Core together with the Wahoo Climb we strongly recommend the rocking table ref. CP-RT1.
COPLATE® Ref. CPWKS-18F2 for trainer Wahoo Kickr Snap. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CPWKS-18F2 for trainer: Wahoo Kickr Snap 2016 - 2018
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit and extension plates for the legs, for fixing the Wahoo Kickr Snap on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 282,20 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit and extension plates for the legs, for fixing the Wahoo Kickr Snap on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 282,20 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CBWKS-20F2 for trainer Wahoo Kickr Snap. Made with black coated birch plywood.
New! COPLATE®️ Ref. CBWKS-20F2 for trainer: Wahoo Kickr Snap 2016 - 2018
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit and extension plates for the legs, for fixing the Wahoo Kickr Snap on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 199,84 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit and extension plates for the legs, for fixing the Wahoo Kickr Snap on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 199,84 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CPBK-18F2 for trainer BKOOL Smart Pro. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CPBK-18F2 for trainer: BKOOL Smart Pro
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the BKOOL Smart on the Coplate® and Included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 262,82 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the BKOOL Smart on the Coplate® and Included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 262,82 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CBBK-20F2 for trainer BKOOL Smart Pro. Made with black coated birch plywood.
New! COPLATE®️ Ref. CBBK-20F2 for trainer: BKOOL Smart Pro
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the BKOOL Smart on the Coplate® and Included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 180,46 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the BKOOL Smart on the Coplate® and Included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 180,46 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CPEDiR-18F2 for trainer Elite Direto. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CPEDiR-18F2 voor trainer: Elite Direto
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Elite Direto on the Coplate® and included standard EPS front wheel riser* , H =5cm (ref. 14036).
Price € 258,02 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Elite Direto on the Coplate® and included standard EPS front wheel riser* , H =5cm (ref. 14036).
Price € 258,02 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
 COPLATE® Ref. CPESU-20F2 for trainer Elite Suito. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CPESU-20F2 voor trainer: Elite Suito
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Elite Suito on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036). Price € 255,32 excl. freight, excl. VAT and excl. Tax (outside EU) Delivery: from stock. Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75 |
COPLATE® Ref. CPED-18F2 for trainer Elite Drivo. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CPED-18F2 voor trainer: Elite Drivo
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Elite Drivo on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 268,24 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit for fixing the Elite Drivo on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 268,24 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CBED-20F2 for trainer Elite Drivo. Made with black coated birch plywood.
New! COPLATE®️ Ref. CBED-20F2 voor trainer: Elite Drivo
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the Elite Drivo on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 185,88 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the Elite Drivo on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 185,88 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CPKRM-18F2 for trainer Kinetic Road Machine. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CPKRM-18F2 for trainer: Kinetic Road Machine
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit and extension plates for the legs, for fixing the Kinetic Road Machine on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 264,48 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made from very strong HPL solid plastic compact plate of 8 mm thick, moisture-, sweat-, and water resistant. Inclusive mounting kit and extension plates for the legs, for fixing the Kinetic Road Machine on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 264,48 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: unknown.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CBKRM-20F2 for trainer Kinetic Road Machine. Made with black coated birch plywood.
New! COPLATE®️ Ref. CBKRM-20F2 for trainer: Kinetic Road Machine
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit and extension plates for the legs, for fixing the Kinetic Road Machine on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 182,12 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit and extension plates for the legs, for fixing the Kinetic Road Machine on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 182,12 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 11,75
COPLATE® Ref. CP-WT1 for trainer ATOM Wattbike. Made with HPL solid plastic compact plate.
COPLATE®️ Ref. CP-WT1 for trainer: ATOM Wattbike
Inclusive mounting kit.
Price € 318,45 excl. freight, excl. VAT and excl. Tax (outside EU)
Expected delivery time: 18 January 2021.
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 15,75
|
All rocker plates are supplied with: - *Standard FRONTWHEEL RISER, - PRESSURE GAUGE, Ref. 14029 - MINI AIR PUMP, Ref. 14028 - MANUAL, in Dutch and English * Important information: While using a rocker plate, we recommend (below): the front wheel riser ref. CP-VT, trainer mat and the step ref. CP-0S |
 (delivery without shown Tacx frontwheel support)
*Standard FRONTWHEEL RISER, Ref. 14036-2020, 2525, 2036 Eliminates almost the height difference with the COPLATE® : HPL execution height 8 cm and ply wood execution 9 cm. Material: EPS foam. Height: 5cm  Pressure gauge ref. 14029
PRESSURE GAUGE, Ref. 14029 with deflating function , Case: S.S. Ø 40 mm, Range: black 0-1 bar / red 0-15 psi.  Minipump ref. 14028
MINI AIR PUMP, Ref. 14028 for inflating the air suspension. |
COPLATE®️ Accessories
Ref. CP-RT1. Made with HPL solid plastic compact plate.
|
ROCKER TABLE KIT Ref. CP-RT1 FOR WAHOO CLIMB
To be used in combination with COPLATE®️for Wahoo Kickr (Ref. CPWK-18F2*) or Wahoo Kickr Core (Ref. CPWC-19F2) and Wahoo Climb with road bike. Special added are the two steel supports on the top plate, these gives the Wahoo Climb, in combination with a COPLATE®️, much more stability, specially during sprinting and climbing, because steering is locked like as the basic front wheel blocks. The rocking table is connected to the COPLATE®️ by a steel tube, two bolts and clamps*. The top- and the bottom plate are connected to each other by means of two rocking rubbers, same ones as in the COPLATE®️. Made from reinforced HPL compact plate 6 mm thick. *Note: If you have a COPLATE®️from before 10 july 2019 you have to drill 2 holes in the top plate according the manual of the CP-RT1. Dimensions (excl. tube): 41x29x8 cm. (LxWxH). Price: € 85,07 excl. freight, excl. VAT and excl. Tax (outside EU) Delivery time: from stock. |
Ref. CP-VT
FRONT WHEEL RISER 'DE LUXE’ Ref. CP-VT
When using the rocker plate with height 8 cm (HPL) till 9 cm (Betonplex) this "DE LUXE" riser is recommended instead of the standard supplied EPS foam front wheel riser with a height of 5cm. Made from reinforced HPL compact plate 6 mm thick and 4 chrome plated steel legs with height of 10 cm.
Dimensions: 41x29x11,5 cm (LxWxH).
Price: € 56,69 excl. freight, excl. VAT and excl. Tax (outside EU)
Note: When ordering front wheel riser ‘DE LUXE’ Ref. CP-VT, the standaard EPS front wheel riser Ref. 14036N will not be supplied with the COPLATE®️ F2.
Delivery: from stock
Ref. CP-0S
STEP Ref. CP-0S
When using the rocker platewith height 8 cm (HPL) till 9 cm (Betonplex) this step is very helpful in getting safe and easy up and off your bike. Made from reinforced HPL compact plate 6 mm thick and four chrome plated steel legs with height of 10 cm.
Dimensions: 27x27x11,5 cm (LxWxH)
Price: € 52,81 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: from stock.
When using the rocker platewith height 8 cm (HPL) till 9 cm (Betonplex) this step is very helpful in getting safe and easy up and off your bike. Made from reinforced HPL compact plate 6 mm thick and four chrome plated steel legs with height of 10 cm.
Dimensions: 27x27x11,5 cm (LxWxH)
Price: € 52,81 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: from stock.
Ref. 14011-80GB
Spare parts:
New model air suspension for COPLATE®️ Ref. 14011-80GB
Thicker wall, better pressure retaining.
Price: € 7,40 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock
Spare parts:
New model air suspension for COPLATE®️ Ref. 14011-80GB
Thicker wall, better pressure retaining.
Price: € 7,40 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock