🇬🇧Reviews / DIY Samples

Reviews and DIY samples

The attached description/drawing was clear to me. Drilled a little deeper where necessary because I used a thicker plate. Cycling on the rocker plate is also very enjoyable. Longer training sessions are a lot more pleasant. Sander NL

Creation with DIY kit DBKL by Sander, NL

Hi there!
I finished my setup successfully and today I had a ride to the radio towers in watopia.
I really enjoyed the rocker plate on the climb.
Here are some pics of my creation
You can use it for your website.
Best regards
Harald

Creation of Harald with DIY kit Ref. DTF18

Picture Frank COPLATE®️F2 Ref. CBWC-22RT1

Dear Co,
Yesterday I received the pump, problem solved, I did my first ride and this is quite an adjustment ... It certainly gives a much more realistic experience while cycling, of course I have to discover this further. May I congratulate you on the installation/user manual, I have rarely received a clearer copy, also everything neatly packaged! Assembling my bike was therefore a piece of cake. Here are a few photos, these are not the most beautiful, my wife pushed me to the storage room / bedroom
Best regards, Frank

Creation with DHZ kit Ref. DWCL 20 Wahoo Core, Foto Judith K.

I am very happy with my rocker plate. The do it yourself kit is clear and very easy to use. I am very satisfied with the rocker plate. Indoor riding is now a lot more pleasant due to the movement created by the rocker plate. I now cycle longer distances more easily without back problems. Judith K.

Creation with DHZ kit Ref. DWCL 20 Wahoo Core, Foto Judith K.

COPLATE®️ Ref. CBTNB-22 with Tacx Neo Bike

I've had a lot of fun with the rocker plate! Was easy to set up as well.
Thanks,
Nick (USA)

Creation from Stefan with DIY kit DTNL19

Wahoo Kickr with Climb

Hoi Co,
Ik ben er heel erg tevreden over
Even wat sleutelen en alles in elkaar zetten
Kleine schroeven waren nog wel uitdaging om te bevestigen aan onderzijde plaat.
Kunnen die niet andersom worden gemonteerd: dus bout van onder er in steken en moer van bovenaf er op draaien?
https://www.facebook.com/541166125/posts/10158095918136126/?d=n

Creation from Stefan with DIY kit DTNL19

Beste,
Ben er erg blij mee. Moest wel een 15mm multiplex plaat gebruiken omdat de 12mm platen bij de bouwmarkt krom waren. Dus bout van M8x 50 gebruikt.
Daarnaast heb ik een opstap links erbij gemaakt en daar bij de laatste verflaag wat kwarts zand bij gedaan voor extra grip.
Top geregeld.
Stefan.

Creation from Rik with DIY kit DWC19

Hoi, ik heb alles in goede orde ontvangen en net een rit gemaakt - het werkt echt briljant. Geen pijnlijke plekken meer en voelde me na afloop een stuk fitter dan normaliter.
Mooi afgewerkte materialen ook. Dank!
Andre (NL)

Picture Andre, Wahoo Kickr Core & COPLATE®️F2 Ref. CBWC-20F2 en CP-RT1

Picture Gert with DIY kit DTFL20

Julian Paget, Ref. CPWC-19F2 & CP-RT1

Picture Emil with Ref. DWCL20 , click to go cyclosportive rocker plate maken

Picture Gert with DIY kit DTFL20

Have already cycled on the plate and it give more fun this way, no more shuffling on the saddle after an hour.
For the people who want to make these plate with plywood it is more easier to use masking tape, then is everything is more visible.
Regards, Gert.

Julian Paget, Ref. CPWC-19F2 & CP-RT1 Salut à tous, Il y a 1 mois j’ai franchis le cap et j’ai acheté la Rocker Plate de chez Bike Acces. Pourquoi cet achat ? Je voulais limiter les sollicitations faite sur le cadre avec l’utilisation du Home Trainer. Avec mon cadre de type « Beam » je savais que l’arrière allait être moins rigide latéralement ce qui s’est confirmé lorsque j’ai mis le cadre sur le HT de mon ergonome (ODCycling que je recommande). Les sensations sont différentes avec la Rocker Plate. Les mouvements du bassin sont accompagnés à l’aide des coussins pneumatiques et ça se ressent aussi au niveau de mon fessier. J’ai mal au cul moins rapidement !! La qualité de fabrication de cette RP est vraiment parfaite, les matériaux sentent vraiment la qualité, la qualité de fabrication est nickel et en cas de besoin d’aide le SAV répond rapidement. Je ne regrette vraiment pas mon achat. C’est vraiment un gros confort supplémentaire :lol: :lol: Julian Paget

Picture Emil with Ref. DWCL20 . Final result of my (CoPlate DIY) rocker, lovin it. I am still experimenting with weights on the non flywheel side (4kg at the moment). Love how it creates a natural feel and therefor improves the indoor ride. No real for/aft movement, but the rubber (vibration isolators) and spacer give it a few mm of movement. see https://cyclosportive.nl/rockerplate-maken/

Creation with a DIY kit Ref. DTG18 for Tacx Vortex

Picture Edwin, Ref. CPWC-19F2

Hallo Co, Inmiddels een aantal ritten gemaakt op de Coplate Ref. CPWC-19F2, ik ervaar het zeker als een verhoogd weg en fietsgevoel. Eenvoudige montage en minder spanning in het frame. Gr Edwin

Picture Edwin, Ref. CPWC-19F2

Some reviews and pictures

Martien van S. , DIY kit for cycle trainer Elite Direto Ref. DEDIR 18

Het bouwen van de rocker plate met behulp van de DIY kit is snel gebeurd. Een opstapje en voorwielverhoger zijn onontbeerlijk en heb ik ook maar gelijk gemaakt. Martien van S. DIY kit for cycle trainer Elite Direto, Ref. DEDIR 18

Heb vandaag alles klaargezet en een korte testrit gemaakt. In een woord -Geweldig-. De ervaring met COPLATE maakt het fietsen op de trainer nog realistischer. assemblage is eenvoudig en handleiding duidelijk en compleet.
MdD

Picture MdD, COPLATE®️ Ref. CPTN-18F2

Foto van Kim met DHZ set Ref. DTNL19 voor fietstrainer Tacx NEO, lange uitvoering Ref. DTNL19

Picture MdD, COPLATE®️ Ref. CPTN-18F2

Foto van Kim met DHZ set Ref. DTNL19 voor fietstrainer Tacx NEO, lange uitvoering Ref. DTNL19

Dag Co,
Na ondertussen een pak ritten op jouw plate :
Je hebt een fantastisch product afgeleverd moet ik zeggen. Geen of amper druk op de patten van de fiets en een zalig gevoel zoals op de weg inderdaad.
Je mag best fier en trots zijn op je uitvinding.
Beste groeten,
Bart

Foto van Bart, COPLATE®️ Ref. CPWK-18F2 en OPSTAP Ref. CP-OS

Picture from John G. USA with COPLATE®️ Ref. CPTN-18F2

I did some research on "rocker plates" being concerned about torquing my frame and my sore butt and looking for a more realistic ride.
There are do it your self kits for $100 up to full on bike plates for $1200 on the market. I'm happy I chose the BikeAccess "CoPlate" from the Netherlands which landed at my home in New Hampshire USA for $348. It fits my Tacx Neo 2 beautifully, goes together easily and works great. It also works well with the Zwift Beta steering function...you can lean into the curves with out needing to steer with a turntable under the front wheel. Great product !
John G. USA

Picture from John G. USA with COPLATE®️ Ref. CPTN-18F2

Picture from Glen (USA) with COPLATE®️ Ref. CPWK-18F2 and STEP Ref. CP-0S

"Hi everyone - just a quick post for those looking at different rocker plates.
I received my rocker plate today from bikeaccess.com, mounted my Wahoo Kickr 2018, aired up the blatters with the supplied pump, pressure gauge, and level. Works AWESOME! I'd recommend it to anyone.
The 'footprint' is smaller than the full-size units and similar motion to the Kinetic Rock & Roll. You can also buy the Kickr Climb extension or buy later if you get one after the initial purchase."
Best regards,
Glen

Ref. CPWK-18F2 & STEP Ref. CP-0S with Wahoo Kickr/Climb, Julian P. (France)

Picture Florian, Tacx Neo with COPLATE®️ Ref. CPTN-18F2

Hi, I have received the package. Thank you so much !! The quality of the material is really superb. Julian P. (France)

Picture Florian, Tacx Neo with COPLATE®️ Ref. CPTN-18F2

Florian (Germany)
Hi Co,
Thank you for the quick delivery. Did my first test ride this morning. Great product, easy installation and so much better ride feeling! I already spread the word on Strava and with my cycling friends. Perhaps more orders for you soon :-)
Regards, Florian, Sent from my phone

Tom W. (UK)
I’m really enjoying my COPLATE rocker plate and would happily recommend it to others. Set up was easy with clear instructions and the bike feels great and much more natural/realistic. It is a bit early to judge but it seems easier on my knees on long trainer sessions too. Out of the saddle efforts feel much more realistic.

Raising the front wheel securely is important and I’ve actually found the perfect solution. An Elite adjustable riser block. It is so good for this purpose that I wonder I’d Bikeacces might think about sourcing them in bulk?

I’m very happy with the product and service and communication with Bikeacess has been very good. Highly recommended!

Picture Tom W. (UK), COPLATE®️ Ref. CPEDiR-18F2 trainer Elite Direto

Franz H. aus Österreich
Guten Morgen!
Gestern ist die Coplate angekommen und ich ich habe sie schon ausprobiert.
die Coplate ist perfekt und zwar in jeder Hinsicht. Die Funktion, die Verarbeitung und das Zubehör sind sehr sehr gut.
Ich werde Ihre Firma weiterempfehlen und verbleibe mit freundlichen Grüßen
Franz H.

Picture Franz H. , COPLATE®️ Ref. CPTN-18F2 with Tacx NEO

Jose (Spain): Hello , l am very happy with your system of roll and congratulation. COPLATE®️ Ref. CPWK-18F2 with Wahoo Kickr and Climb

Picture Lucien van Z. COPLATE & Tacx Neo

Lucien van Z. (Netherlands),
'I have been using the COPLATE together with my Tacx Neo for more than a year now.
The natural feel adds so much to the training experience that I cannot imagine training without the COPLATE anymore!
Another benefit is that it puts much less strain on your frame.
It's a quality product delivered with excellent service and advise.' Lucien van Z (Netherlands)

Jan Peter D., Netherlands, COPLATE Wahoo Kickr
Ik ben zeer tevreden over de service van Bikeacces en absoluut erg blij met de aangeschafte Coplate. De bevestiging van mijn Kickr op de Coplate is eenvoudig, degelijk en zeer stevig. Door het gebruik van de Coplate krijg je absoluut een meer natuurlijke fiets-ervaring. Daarnaast veel minder frictie op het frame.
Met vriendelijke groet, Jan Peter Danse

Foto Jan Peter D. COPLATE®️ Ref. CPWK-18F2 & Wahoo Kickr

Henrik O. Denmark, DIY kit Wahoo Kickr Core
It is perfect and much better and more comfortable than fixed mounting.
Thanks for very good service and a perfect DIY set.

Foto Jan Peter D. COPLATE®️ Ref. CPWK-18F2 & Wahoo Kickr

Henrik O.

Picture Henrik O. DIY kit Ref. DWC19 for cycle trainer Wahoo Core

Jan D, Netherlands DIY kit Tacx NEO

Foto Jan D. , DIY kit Ref. DTNL19 for cycle trainer Tacx NEO, long execution.

Jan D.

Foto Jan D, DIY kit Ref. DTNL19 for cycle trainer Tacx NEO, long execution.

Marcin P., Belgium, Coplate® with Wahoo Kickr and Wahoo Climb

Picture Marcin P., COPLATE®️ Ref. CPWK-18F2 with Wahoo Kickr and Climb

Bertram K. CoPlate® for Tacx NEO (Germany):
Thx fort he CoPlate®. This is very awsome !!! My friends like it and he will also order one. I have create a Video and i will show it on ours Website and Facebook bike-innovations here is the Link: https://www.youtube.com/watch?v=NEg-4KScHIw&feature=youtu.be

Video Bertram K.

Lee P. (UK) CoPlate® for Tacx Vortex Smart
Good Morning Co
I'm glad to report that the CoPlate® has been assembled and tested last night and I was very impressed, I've been making a review with photos to post to the Zwift group.
Lee P.

Zwift group: read complete review from Lee Parker:

BIKEACCES.COM CO-PLATE REVIEW
------------------------------------------------------------------------------

Video: Stein Magnus Olafsrud testing CoPlate

------------------------------------------------------------------------------
Ole V. (Denmark) CoPlate® for Tacx Genius
Coplate CP- TG14 , 1 Step CP- OS , 1 Front wheel riser CP- VT
I received my order, looks good :-)I must get used to sit on the bike when it flips :-) Thanks for the deal :-)
Best regards.
Ole V.
------------------------------------------------------------------------------

William L. (France) CoPlate® for Tacx Ironman
Hi Co,
I have just received my Ironman trainer and am really impressed!
As I suspected, I really need to go lateral when I do out of the saddle!
I have received the plate and am quite happy with it !
Thanks,
William L.
------------------------------------------------------------------------------

Arjen S. (NL) CoPlate® voor Tacx Bushido
Zie hieronder. Tevreden klant. Net 8,5 km mont ventoux op gefietst.
Voordelen: samen met electr rem wordt trainen bergop nog echter. Kan de fiets weer gebruiken bij het klimmen ipv enkel de benen.
Nadelen: -
Beoordeling max 5*:
Website: **
Voldoet aan verwachting: *
Prijs/kwaliteit verhouding : *
Levertijd: *
Handleiding: *
Installatie: ***
Arjen S.

Darren S. (UK) CoPlate® for WAHOO Kickr

Hi Co Yes very happy with it. I’ve attached some pictures, it all went really well watching it. Website BIKEACCES: 3 Delivery: 5 Quality: 5 Service: 5 Packaging:5 Manual: 5 Install: 4

David W. (USA) CoPlate® for BKOOL I did a 30-mile, 2-hour ride with 3000 feet of climbing yesterday, and the natural motion of the CoPlate made it more realistic and more comfortable. You can even lean into the turns!

DHZ set voor Tacx Flux: Sinds een paar dagen gebruiken we de kantelplaat, zelf in elkaar gezet met de duidelijke handleiding die we bij het doe-het-zelf-pakket kregen. Ik vond het wel spannend, het is net of je voor de eerste keer op de fiets stapt, maar het went snel. Het gevoel is veel realistischer dan zonder kantelplaat, zoals we de afgelopen 3 maanden hebben geZwift. Ook is het veel stiller met de kantelplaat, wel fijn nu de Tacx tijdelijk in de woonkamer staat vanwege de verbouwing. Met vriendelijke groet, Alette W.

Javier G. (Spain) CoPlate® for ELITE Hi, the coplate works very well. I have to inflate one ballon more than the other because the Real Turbo Muin has more weight in the left side (in this side are placed flywheel and motor). Rating max. 5*: Website: *** Delivery: **** Quality: **** Packaging: ***** Manual: ** Install: ***** Javier G.

M. Benvenuto (Italy) CoPlate® for Tacx Genius Very satisfied. I will send you the picture when I am back from a travel abroad. In terms of ratings I added them to your mail below Am an happy customer Thanks Marco Rating max. 5*: Website BIKEACCES: 3 Delivery: 5 Quality: 4 Service: 5 Packaging: 5 Manual: 4 Install: 4

Bac N. (USA), CoPlate® for WAHOO Kickr
Hi,
Just want to say what a great product and service your company has provided. It was only my 3rd ride with the Coplate® so far and I have enjoyed more and more each time. It gives a realistic feelings just like in real life, especially when I'm out of saddle, and I tend to do that quite a bit. CoPlate® definitely enhances indoor riding and I believe may help you to work on your core as well.
Again, thanks for an excellent product! (I will certainly pass the words on to my friends).
Bac N.

Danny H. CoPlate® for Wahoo Kickr Snap with Wahoo Climb Although the CoPlate® was initially not readily available for the Kickr Snap, Co was really quick to make one for me nonetheless! Once it arrived I was happy to notice the carefulness with which Co crafted and sent the CoPlate®. The remaining instructions of the manual were all clear and easy to follow and before I knew it I could rock out on my Kickr Snap! Thanks for a wonderful addition to my trainer setup, Co. - Danny H.

Have already cycled on the plate and it give more fun this way, no more shuffling on the saddle after an hour. For the people who want to make these plate with plywood it is more easier to use masking tape, then is everything is more visible.Regards, Gert.​

Some reviews and pictures

​Jan D, Netherlands DIY kit Tacx NEO

Have already cycled on the plate and it give more fun this way, no more shuffling on the saddle after an hour.
For the people who want to make these plate with plywood it is more easier to use masking tape, then is everything is more visible.
Regards, Gert.

Jan D, Netherlands DIY kit Tacx NEO