

COPLATE®️ Ref. CBKRM-20F2 for trainer: Kinetic Road Machine
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the Kinetic Road Machine on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 193,90 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
The top and bottom plate are made of black coated birch plywood 12mm. Inclusive mounting kit for fixing the Kinetic Road Machine on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Price € 193,90 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50

COPLATE®️ Ref. CBWT1 for trainer: ATOM Wattbike
Inclusive mounting kit.
Price € 233,90 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock
Freight: NL € 8,95 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 15,75
COPLATE®️ Accessories

FRONT WHEEL ROCKER TABLE KIT Ref. CB-RT2*
The front wheel rocker table brings the frontwheel at the same height with the COPLATE®️. Can be used in combination with COPLATE®️for use with road bike. Two special supports give much more stability, specially during sprinting and climbing. The front wheel rocker table is connected to the COPLATE®️ by a steel tube, two bolts and clamps*. The top- and the bottom plate are connected to each other by means of two rocking rubbers, same ones as in the COPLATE®️.
Made of black coated birch plywood 12mm.
*Important information: If the 2 mounting holes (Ø6.5 mm) are missing in the COPLATE®️, they must be drilled into the top plate of the COPLATE®️ according to the manual of the CB-RT2.
Dimensions (excl. tube): 41x29x8 cm. (LxWxH).
Price: € 46,57 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: from stock.
The front wheel rocker table brings the frontwheel at the same height with the COPLATE®️. Can be used in combination with COPLATE®️for use with road bike. Two special supports give much more stability, specially during sprinting and climbing. The front wheel rocker table is connected to the COPLATE®️ by a steel tube, two bolts and clamps*. The top- and the bottom plate are connected to each other by means of two rocking rubbers, same ones as in the COPLATE®️.
Made of black coated birch plywood 12mm.
*Important information: If the 2 mounting holes (Ø6.5 mm) are missing in the COPLATE®️, they must be drilled into the top plate of the COPLATE®️ according to the manual of the CB-RT2.
Dimensions (excl. tube): 41x29x8 cm. (LxWxH).
Price: € 46,57 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: from stock.

FRONT WHEEL RISER 'DE LUXE’ Ref. CP-VT
When using the rocker plate with height 8 cm (HPL) till 9 cm (Betonplex) this "DE LUXE" riser is recommended instead of the standard supplied EPS foam front wheel riser with a height of 5cm. Made from reinforced HPL compact plate 6 mm thick and 4 chrome plated steel legs with height of 10 cm.
Dimensions: 41x29x11,5 cm (LxWxH).
Price: € 56,69 excl. freight, excl. VAT and excl. Tax (outside EU)
Note: When ordering front wheel riser ‘DE LUXE’ Ref. CP-VT or CB-RT2, the standaard EPS front wheel riser Ref. 14036N will not be supplied with the COPLATE®️ F2.
Delivery: from stock

STEP Ref. CP-0S
When using the rocker platewith height 8 cm (HPL) till 9 cm (Betonplex) this step is very helpful in getting safe and easy up and off your bike. Made from reinforced HPL compact plate 6 mm thick and four chrome plated steel legs with height of 10 cm.
Dimensions: 27x27x11,5 cm (LxWxH)
Price: € 52,81 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: from stock.
When using the rocker platewith height 8 cm (HPL) till 9 cm (Betonplex) this step is very helpful in getting safe and easy up and off your bike. Made from reinforced HPL compact plate 6 mm thick and four chrome plated steel legs with height of 10 cm.
Dimensions: 27x27x11,5 cm (LxWxH)
Price: € 52,81 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery time: from stock.

Spare parts:
Air suspension for COPLATE®️ Ref. 14011-V2280
Price: € 7,95 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock
Spare parts:
Air suspension for COPLATE®️ Ref. 14011-V2280
Price: € 7,95 excl. freight, excl. VAT and excl. Tax (outside EU)
Delivery: from stock