COPLATE®️ Ref. CBTN-20F2 for trainer: Tacx NEO, NEO 2 en NEO 2T
Short execution.The top and bottom plate are made of coated birch plywood 12mm.
Including mounting kit with 4 plugs with bolts (no velcro) for solid securing of the Tacx Neo on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036). Due to the small tilting angle of the front wheel, it is not absolutely necessary to use a front wheel rocker table.
Retail price € 256,90 : excl. freight and excl. Tax (outside EU)
Expected delivery: 29 February 2024
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
Short execution.The top and bottom plate are made of coated birch plywood 12mm.
Including mounting kit with 4 plugs with bolts (no velcro) for solid securing of the Tacx Neo on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036). Due to the small tilting angle of the front wheel, it is not absolutely necessary to use a front wheel rocker table.
Retail price € 256,90 : excl. freight and excl. Tax (outside EU)
Expected delivery: 29 February 2024
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
An alternative to the above COPLATE®️is the
COPLATE®️ Ref. CBTN-22RT2 for trainer: Tacx NEO, NEO 2 en NEO 2T
Long execution inclusive rocker table kit Ref. CB-RT2. The top and bottom plate are made of coated birch plywood 12mm.
Including mounting kit with 4 plugs with bolts (no velcro) for solid securing of the Tacx Neo on the Coplate®. The advantage of this long execution is that no separate front wheel riser is required and the bicycle is exactly horizontal when using a Coplate® with RT2. It does not give a better realistic cycling feeling while cycling.
Retail price € 323,40 excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
COPLATE®️ Ref. CBTN-22RT2 for trainer: Tacx NEO, NEO 2 en NEO 2T
Long execution inclusive rocker table kit Ref. CB-RT2. The top and bottom plate are made of coated birch plywood 12mm.
Including mounting kit with 4 plugs with bolts (no velcro) for solid securing of the Tacx Neo on the Coplate®. The advantage of this long execution is that no separate front wheel riser is required and the bicycle is exactly horizontal when using a Coplate® with RT2. It does not give a better realistic cycling feeling while cycling.
Retail price € 323,40 excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
COPLATE®️ Ref. CBTNB-22 for trainer: Tacx NEO BIKE
The top and bottom plate are made of coated birch plywood 12mm.
Including mounting kit with 2 bolts (no velcro) for solid securing of the Tacx Neo Bike on the Coplate®.
Retail price € 326,70 excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
COPLATE®️ Ref. CBTF-20F2 for trainer: Tacx Flux, Flux S en Flux 2.
Short execution. The top and bottom plate are made of dark brown with wire mesh coated birch plywood 12mm. Inclusive mounting kit with bracket (no velcro) and 2 reusable tie wraps for securing the Tacx Flux on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Not suitable for Tacx Flux in combination with BlackTrack. Due to the small tilting angle of the front wheel, it is not absolutely necessary to use a front wheel rocker table.
Retail price € 255,50 excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
Short execution. The top and bottom plate are made of dark brown with wire mesh coated birch plywood 12mm. Inclusive mounting kit with bracket (no velcro) and 2 reusable tie wraps for securing the Tacx Flux on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036).
Not suitable for Tacx Flux in combination with BlackTrack. Due to the small tilting angle of the front wheel, it is not absolutely necessary to use a front wheel rocker table.
Retail price € 255,50 excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
An alternative to the above COPLATE®️is the
COPLATE®️ Ref. CBTF-22RT2 for trainer: Tacx Flux, Flux S en Flux 2.
Long execution inclusive rocker table kit Ref. CB-RT2. The top and bottom plate are made of coated birch plywood 12mm.
Inclusive mounting kit with bracket (no velcro) and 2 reusable tie wraps for securing the Tacx Flux on the Coplate®. The advantage of this long execution is that no separate front wheel riser is required and the bicycle is exactly horizontal when using a Coplate® with RT2. It does not give a better realistic cycling feeling while cycling.
Retail price € 322,00 excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
COPLATE®️ Ref. CBTF-22RT2 for trainer: Tacx Flux, Flux S en Flux 2.
Long execution inclusive rocker table kit Ref. CB-RT2. The top and bottom plate are made of coated birch plywood 12mm.
Inclusive mounting kit with bracket (no velcro) and 2 reusable tie wraps for securing the Tacx Flux on the Coplate®. The advantage of this long execution is that no separate front wheel riser is required and the bicycle is exactly horizontal when using a Coplate® with RT2. It does not give a better realistic cycling feeling while cycling.
Retail price € 322,00 excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
COPLATE®️ Ref. CBTG-20F2 for smart trainer Tacx: Genius, i-Vortex, Ironman, Bushido, Booster, Satori, FLOW and Blue serie (Suitable for use without BlackTrack)
Short execution. The top and bottom plate are made of dark brown / black coated birch plywood 12mm. Including mounting kit with 4 bolts and pipe clamps. (no Velcro) for a solid securing of the Tacx Genius etc. on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036N).
Due to the small tilting angle of the front wheel, it is not absolutely necessary to use a front wheel rocker table.
(Long execution on request)
Retail price € 245,40 excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
Short execution. The top and bottom plate are made of dark brown / black coated birch plywood 12mm. Including mounting kit with 4 bolts and pipe clamps. (no Velcro) for a solid securing of the Tacx Genius etc. on the Coplate® and included standard EPS front wheel riser*, H =5cm (ref. 14036N).
Due to the small tilting angle of the front wheel, it is not absolutely necessary to use a front wheel rocker table.
(Long execution on request)
Retail price € 245,40 excl. freight and excl. Tax (outside EU)
Delivery: from stock
Freight: NL from € 5,60 , Belgium, Germany, Denmark, France, Luxembourg, UK, Austria, Sweden and Spain: from € 12,50
COPLATE®️ Accessories
FRONT WHEEL ROCKER TABLE KIT Ref. CB-RT2*
The front wheel rocker table brings the frontwheel at the same height with the COPLATE®️. Can be used in combination with COPLATE®️for use with road bike. Two special supports give much more stability, specially during sprinting and climbing. The front wheel rocker table is connected to the COPLATE®️ by a steel tube, two bolts and clamps*. The top- and the bottom plate are connected to each other by means of two rocking rubbers, same ones as in the COPLATE®️. Made of black coated birch plywood 12mm. *Important information: If the 2 mounting holes (Ø6.5 mm) are missing in an older COPLATE®️, they must be drilled into the top plate of the COPLATE®️ according to the manual of the CB-RT2. Dimensions (excl. tube): 41x29x8 cm. (LxWxH). Price: € 77,40 excl. freight and excl. Tax (outside EU) Delivery time: from stock. |
STEP Ref. CB-0S
When using the rocker plate with height 9 cm, this step is very helpful in getting safe and easy up and off your bike. Made of black coated birch plywood 12mm and four steel legs.
Dimensions: 27x27x12 cm (LxWxH)
Price: € 46,80 excl. freight and excl. Tax (outside EU)
Delivery time: from stock.
When using the rocker plate with height 9 cm, this step is very helpful in getting safe and easy up and off your bike. Made of black coated birch plywood 12mm and four steel legs.
Dimensions: 27x27x12 cm (LxWxH)
Price: € 46,80 excl. freight and excl. Tax (outside EU)
Delivery time: from stock.
FRONT WHEEL RISER 'DE LUXE’ Ref. CB-VT
When using the rocker plate with height 9 cm this "DE LUXE" riser is recommended instead of the standard supplied EPS foam front wheel riser with a height of 5cm. Made of black coated birch plywood 12 mm and 4 steel legs.
Dimensions: 41x29x12 cm (LxWxH).
Price: € 49,20 excl. freight and excl. Tax (outside EU)
Delivery: from stock
FRONT WHEEL RISER 'DE LUXE’ Ref. CB-VT
When using the rocker plate with height 9 cm this "DE LUXE" riser is recommended instead of the standard supplied EPS foam front wheel riser with a height of 5cm. Made of black coated birch plywood 12 mm and 4 steel legs.
Dimensions: 41x29x12 cm (LxWxH).
Price: € 49,20 excl. freight and excl. Tax (outside EU)
Delivery: from stock